Roller knap for sizing
- Gothichome
- Moderator
- Posts: 4188
- Joined: Sun Aug 16, 2015 8:34 pm
- Location: Chatham Ont
Roller knap for sizing
Folks got to size the plaster in the project room. The question is, what knapp should I be using?
Re: Roller knap for sizing
I think a 10 is for reasonably smooth walls.
Thicker nap = holds more paint = more stipple surface on the paint laid down on the wall ?
If your walls are not drywall smooth then you may do better with a heavier nap (15) to get paint on a slightly inconsistent surface.
Thicker nap = holds more paint = more stipple surface on the paint laid down on the wall ?
If your walls are not drywall smooth then you may do better with a heavier nap (15) to get paint on a slightly inconsistent surface.
- Gothichome
- Moderator
- Posts: 4188
- Joined: Sun Aug 16, 2015 8:34 pm
- Location: Chatham Ont
Re: Roller knap for sizing
Baby bum smooth plaster. I am applying wall sizing before wall papering.
Re: Roller knap for sizing
If it were me I would use a big ass brush, but if I were using a roller I'd go for short nap
Mick...
-
- Has many leather bound books
- Posts: 4616
- Joined: Tue Aug 18, 2015 6:11 pm
- Location: Near Vancouver BC
Re: Roller knap for sizing
a short nap sounds kinda nice right about now ..... sorry I can't help myself
- mjt
- Shakes a cane at new house owners
- Posts: 557
- Joined: Fri Aug 21, 2015 2:04 am
- Location: Saint Paul, MN
- Contact:
Re: Roller knap for sizing
Short nap because you don't want the "orange-peel" effect under the wallpaper.
In the US, nap is measured in fractions of an inch rather than, I assume, millimeters in Canada. You'd probably want 1/4-inch to get a smooth surface when you're done. 3/8-inch will still leave some texture if it dries quickly.
In the US, nap is measured in fractions of an inch rather than, I assume, millimeters in Canada. You'd probably want 1/4-inch to get a smooth surface when you're done. 3/8-inch will still leave some texture if it dries quickly.
- Gothichome
- Moderator
- Posts: 4188
- Joined: Sun Aug 16, 2015 8:34 pm
- Location: Chatham Ont
Re: Roller knap for sizing
Ok.thanks for the info, got myself a 5mm 3/16 knapp.